LB-A Polyolefin Shrink Film /

LB-A Polyolefin Shrink Film

LB-A is a widely used polyolefin shrink film with good stiffness，toughness，optics and excellent sealing & shrinkage.

It is a general-purpose heat shrinkable film covers a broad spectrum of shrink warp applications, provides premium appearance display and good protection. Due to balanced stiffness & toughness，decent sealing and wide shrink temperature range, it is capable to work on all kinds of shrink warp machines, including high speed packing system.

Thickness12um、15um、19um、25um、30um

LB-A.pdf

Technical Index

TEST ITEM		UNIT	ASTM TEST	TYPICAL VALUES

GAUGE				12um	15um		19um	25um	30um
TENSILE STRENGTH
Tensile Strength (MD)		N/mm2	D882	128	125		120	110	105
Tensile Strength (TD)				123	120		115	105	100
ELONGATION
Elongation(MD)		%	D882	110	110		115	120	120
Elongation (TD)				105	105		110	115	115
TEAR
MD at 400gm		gf	D1922	10.0	13.3		16.5	22.8	27.5
TD at 400gm				9.5	12.3		16.0	22.3	26.5
SEAL STRENGTH
MD\Hot Wire Seal		N/mm	F88	0.73	0.90		1.07	1.25	1.45
TD\Hot Wire Seal				0.75	0.94		1.09	1.30	1.55
COF (Film To Film)
Static			D1894	0.22	0.21		0.19	0.22	0.25
Dynamic				0.22	0.21		0.19	0.22	0.25
OPTICS
Haze			D1003	2.1	2.5		3.1	3.6	4.5
Clarity			D1746	98.5	98.0		97.0	95.0	92.0
Gloss @ 45Deg			D2457	88.0	87.0		84.0	82.0	81.0
BARRIER
Oxygen Transmission Rate		cc/㎡/day	D3985	11500	10200		7700	5400	4500
Water Vapor Transmission Rate		gm/㎡/day	F1249	43.8	36.7		26.7	22.4	19.8
SHRINKAGE PROPERTIES				MD		TD		MD	TD
Free Shrinkage	100℃	%	D2732	23		32		21	27
	110℃			37		44		33	43
	120℃			59		64		57	61
	130℃			67		68		65	67
				MD		TD		MD	TD
Shrink Tension	100℃	Mpa	D2838	1.85		2.65		1.90	2.60
	110℃			2.65		3.50		2.83	3.65
	120℃			2.85		3.65		2.95	3.60
	130℃			2.65		3.20		2.75	3.05

Note: The above information is based on our internal evaluation data and is for reference only.